Complete Concrete Machinery Solutions — From Batching to Finishing
Concrete is the most consumed material on earth after water — over 30 billion tons annually. Every cubic meter requires equipment: batching plants to proportion the mix, mixers to combine the ingredients, pumps to place the concrete, vibrators to consolidate it, and trowels and grinders to finish the surface. LUYRN manufactures this entire chain.
Our concrete machinery division serves ready-mix concrete producers, precast manufacturers, road contractors, flooring specialists, and construction companies across 40+ countries. Whether you need a single self-loading concrete mixer for a remote construction site or a complete 120 m³/h stationary batching plant with cement silos and control system — we design, manufacture, and ship it.
Concrete Machinery Product Categories
Concrete Batching Plants
Stationary and mobile batching plants from 25 m³/h to 120 m³/h production capacity. LUYRN batching plants feature:
- PLD series aggregate batching machines with load-cell weighing (±2% accuracy)
- Twin-shaft compulsory mixers (JS series) — faster mixing cycle and better homogeneity than drum mixers
- Screw conveyors for cement and fly ash transport from silo to weigh hopper
- PLC-based control system with recipe storage (99 formulas), moisture compensation, and production reporting
- Bolt-together modular structure — no on-site welding required, assembly in 5–7 days with local labor
Self-Loading Concrete Mixers
The ultimate machine for remote-site and small-batch concrete production. A self-loading concrete mixer combines a loading shovel, rotating drum mixer, and weigh system in a single mobile unit — one operator produces and places concrete without any additional equipment. LUYRN self-loading mixers range from 1.2 m³ to 6.5 m³ per batch.
Why they’re popular in developing markets: no batching plant needed, no concrete truck fleet, no pump — just fuel and one trained operator. Typical production: 8–12 m³ per hour for a 3.5 m³ machine. Common applications: rural road construction, foundation works, irrigation canal lining, and small-scale precast production.
Concrete Pumps
LUYRN supplies trailer-mounted concrete pumps (diesel engine or electric motor drive) with outputs from 30 m³/h to 90 m³/h and pumping pressures up to 13 MPa. Features include S-valve distribution system (lower wear than gate valves), hydraulic accumulator for surge-free concrete flow, and remote control operation. Compatible with standard 125 mm concrete delivery pipes.
For buyers who need both mixing and pumping, our combination mixer-pump units deliver a complete mobile solution — ideal for shotcrete, grouting, and small-to-medium pour applications.
Concrete Floor Finishing Equipment
The difference between a rough concrete slab and a polished showroom floor is finishing equipment. LUYRN manufactures ride-on power trowels (gasoline engine, 900–1,000 mm blade diameter), walk-behind trowels, concrete floor grinders (planetary or rotary, 380V/220V options), and concrete scarifiers (surface preparation, coating removal). Our grinders are compatible with diamond, PCD, and resin bond tooling from all major brands.
Road and Concrete Cutting Equipment
Concrete road cutters (gasoline or electric, 350–500 mm blade diameter), joint saws, and asphalt crack sealing machines. These are essential for expansion joint cutting in new concrete pavements and repair work on existing infrastructure. Our road cutters feature a depth guide with locking mechanism, water-fed blade cooling, and a guide-wheel system for straight-line tracking.
Concrete Vibrators and Screeds
Proper consolidation is the difference between concrete that lasts 50 years and concrete that spalls in 5. LUYRN supplies immersion vibrators (poker type, 25–60 mm head diameter, flexible shaft or electric motor integrated), vibratory truss screeds for large slab leveling, and concrete vibrating rulers for smaller pours. Without vibration, even a perfect mix design will have honeycombing and voids that compromise structural integrity.
How to Specify Concrete Machinery for Your Project
B2B buyers should approach concrete machinery procurement with these parameters clearly defined:
- Required output (m³/hour or m³/day): This determines batching plant capacity, mixer size, and pump output. Always add 20% headroom to your peak demand — running equipment at 100% capacity continuously reduces service life.
- Concrete mix design: High-slump concrete (150+ mm) pumps easier but requires different batching accuracy. Low water-cement ratio mixes (0.35 or below) need compulsory mixers — drum mixers won’t blend properly. Self-compacting concrete (SCC) requires different vibration strategies.
- Site access and logistics: Can a batching plant be delivered on a standard flatbed truck? Is there a crane for silo erection? Is three-phase power (380V/50Hz typically) available, or do you need diesel-powered equipment? These logistics questions should be answered before you order.
- Climate conditions: In temperatures above 35°C, you’ll need aggregate cooling or chilled water batching. Below 5°C, you’ll need aggregate heating and hot water. LUYRN can integrate these systems — but they must be specified up front.
- Local cement and aggregate characteristics: Cement type, aggregate shape (angular vs. rounded), and maximum aggregate size all affect mixer and pump selection. Share your local material data — we’ll configure accordingly.
LUYRN Concrete Equipment Manufacturing Standards
- Mixer drum and blades: Fabricated from Q345B structural steel with replaceable Ni-hard cast iron wear liners. Drum interior is sandblasted to SA 2.5 and coated with two-component epoxy for corrosion protection.
- Weighing system: Load cells from reputable manufacturers (Zemic, HBM, or equivalent) with 0.02% accuracy class. Annual recalibration recommended; LUYRN provides calibration weights and procedure documentation.
- Hydraulic systems: Pumps and motors from established hydraulic manufacturers. All circuits include pressure filtration (10-micron absolute) and return-line filtration (25-micron).
- Electrical systems: IP65 rated enclosures for outdoor installation. Control panels pre-wired and tested before shipment. CE / IEC compliant components throughout.
- Testing: Every batching plant undergoes a water-batching calibration test. Every mixer is run with aggregate. Every pump is tested with water at maximum pressure. Test certificates included in the shipment documentation.
Concrete Machinery FAQ
What is the difference between a self-loading mixer and a traditional concrete mixer truck?
A traditional concrete mixer truck is essentially a transport vehicle — it picks up ready-mixed concrete from a batching plant and delivers it to the pour site. A self-loading mixer is a self-contained production unit — it loads its own aggregates and cement using an onboard shovel, weighs them, mixes the concrete, and discharges it, all from one machine operated by one person. Self-loading mixers eliminate the batching plant entirely, making them ideal for remote sites, small-quantity pours, and markets where ready-mix infrastructure doesn’t exist. The trade-off: lower hourly output (8–12 m³/h for self-loading vs. 60+ m³/h for a batching plant + mixer trucks).
Can LUYRN supply a turnkey batching plant including civil works design?
Yes. For batching plant orders, we provide complete foundation drawings, utility connection specifications (power, water, compressed air), and a site preparation checklist. We do not perform civil construction — that must be done by a local contractor — but we provide all the technical data they need to build the foundations correctly. For large projects (>$200,000), we can send an engineer to supervise installation.
What is the delivery time for a concrete batching plant?
Standard HZS25–HZS60 plants: 25–35 working days. HZS90–HZS120 plants: 35–45 working days. Turnkey systems with silos, control room, and conveyor systems: 45–60 working days. Ocean freight transit time is additional, typically 20–40 days depending on destination.
Need Concrete Equipment for Your Next Project?
Send your project specs — required output, mix design, site conditions. We’ll configure and quote your concrete machinery package. Response within 24 hours.